(+971) 4 3864844
 (+971) 55 9020335  / (+971) 54 3080764

ESDUAE - The online store for all your ESD requirements

0 Item(s) AED0.00

You have no items in your shopping cart.

Earth Facility (SP-146)

Be the first to review this product

Product ID :SP-146
Earth Facility is grounding the charges from ESD Table and ESD Mats....
Read more

Availability: In stock


M5 Bolt with knurled threaded nut to secure in place With 2m long Copper tape

The plug fits directly in to the mains supply socket, connecting with only the earth conductor. Live and Neutral pins have been molded in insulating plastic, fitting into
 the supply socket but completely dormant.
At the front of the plug are connectors linked via 1M Ohm resistors to the earth pin,  inside the plug. The connectors offer a link to ground for connecting cords from theEPA.The1M Ohm resistor to each connector offer protection in the event the workstation becomes live. That protection would limit the current to less than 0.3mA at 240 volts. Should the fault current continue the resistor will open circuit.Insert the plug into the supply socket making sure it is fully home, then connect the various elements of the EPA...such as wrist strap cord, bench or floor matting connection cords. This ensures that the EPA is at the same earth potential. As generally the workstation has more than one plug socket it is possible to use more  than one EBP if more connections are required.Warning the plug must only be used for ESD control purposes.The EBP is sealed and cannot be opened for repair. To test each connection use a meter from the connector to the earth pin. The reading should be between 0.9 and 1.1M Ohms. As each connection point has its own 1M Ohm resistor, the resistance between two connectors should be approximately 2M Ohms. All EBP’s are tested and then packed in a bag.

Additional Information

Color No
Manufacturer No
Send inquiry? No
Price AED80.00
Unit Name pc
Call For Price No

Write Your Own Review

  1 star 2 stars 3 stars 4 stars 5 stars

Shipping policy

  • Orders are shipped on business days only. Business days are Sunday - Thursday, excluding Government holidays.
  • Customer can pick the shipment from our office from Sunday to Thursday from 9:00 Am to 6:00 Pm, and this would be free of cost. For shipments to be delivered to customer, there would be shipping charges applicable based on the destination.
  • For products in stock, items can be collected/shipped immediately. For products, which is not in stock, you could speak to one of our support staff and they would be able to assist you on the same.
  • Free zone charges & customs charges should be paid by the customer and is not included in the shipping cost.

Warranty Terms

All products will carry manufacturer warranty, any damage caused by misuse or physical damage will not be covered under warranty. The warranty periods vary according to different products, and for details please speak to our office. Any claims for missing items from shipment must reported with in 24 hours of receiving the shipment and claims after that will not be entertained..
Please wait...